HP 1010 User Manual

36
care and maintenance
hp fax 1010 series
if the paper is jammed in the printing area
1 Remove the jammed paper by pulling it out
smoothly in the direction of the arrow as
shown.
If the paper tears when it is being removed
check to ensure that no small pieces have
been left inside the machine.
2 Press Cancel .
3 If this was a fax, reprint the fax. For more
information, see reprinting faxes on
page 29.
if the paper is jammed in the paper feed
area
1 Remove the jammed paper as shown.
If the paper tears when it is being
removed check to ensure that no small
pieces have been left inside the machine.
2 Reload new paper with the print side
facing toward you.
3 Press Cancel when finished.
maintain the print cartridge
To maintain good printing quality, we recommend you occasionally maintain the print
cartridge and its associated parts:
clean the print cartridge nozzles
If characters are not printing completely or white streaks appear in your text, you may have
clogged nozzles. Clean the print cartridge as described below:
1 Press Menu repeatedly until MAINTENANCE appears and press Start/Enter .
2 Scroll to Clean Cartridge by pressing  and press Start/Enter .
3 Examine the printed test pattern.
• If print quality does not improve, reinstall the cartridge and repeat these steps.
• If the line is still broken, wipe the nozzles and contacts. For more information, see
wipe the print nozzles and contacts on page 36.
wipe the print nozzles and contacts
If cleaning the print cartridge nozzles as discussed above does not help and you are certain
the cartridge has plenty of ink, the problem may be caused by dried ink on the print
cartridge nozzles and contacts or the print cartridge carrier contacts. Follow these two sets
of instructions for manual cleaning.

HP 1010 Specifications

General

Brand	HP
Model	1010
Category	Fax Machine
Language	English