Hard drive
NOTE: The hard drive spare part kit does not include the hard drive cable or bracket. The hard drive
cable and bracket are included in the Hard Drive Hardware Kit.
Description Spare part number
1-TB, 5400-rpm, 2.5-in 676521-001
750-GB, 5400-rpm, 2.5-in 634250-001
640-GB, 5400-rpm, 2.5-in (HP 240/HP 245 only) 669300-001
500-GB, 7200-rpm, 2.5-in 634925-001
500-GB, 5400-rpm, 2.5-in 669299-001
320-GB, 5400-rpm, 2.5-in 622643-001
Hard Drive Hardware Kit (includes hard drive cable and bracket) 685089-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 56).
5. Remove the memory module/wireless module compartment cover (see
WLAN module
on page 64).
70 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
Need help?
General
