Reverse this procedure to install the processor heat sink.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the processor heat
sink (1) and the processor (2) each time the processor heat sink is removed. Thermal material is included
with all processor heat sink and processor spare part kits.
Processor
NOTE: Replacement thermal material is included with all processor spare part kits.
Description Spare part number
Intel Core 2 Duo T9500 2.6-GHz processor (6-MB L2 cache, 800-MHz FSB) 463051-001
Intel Core 2 Duo T9300 2.5-GHz processor (6-MB L2 cache, 800-MHz FSB) 463050-001
Intel Core 2 Duo T8300 2.4-GHz processor (3-MB L2 cache, 800-MHz FSB) 463049-001
Intel Core 2 Duo T8100 2.1-GHz processor (3-MB L2 cache, 800-MHz FSB) 463048-001
Intel Core 2 Duo T7800 2.6-GHz processor (4-MB L2 cache, 800-MHz FSB) 458218-001
Intel Core 2 Duo T7700 2.4-GHz processor (4-MB L2 cache, 800-MHz FSB) 450589-001
Intel Core 2 Duo T7500 2.2-GHz processor (4-MB L2 cache, 800-MHz FSB) 450588-001
Intel Core 2 Duo T7300 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB) 450587-001
Intel Core 2 Duo T7250 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB) 460283-001
Intel Core 2 Duo T7100 1.8-GHz processor (2-MB L2 cache, 800-MHz FSB) 450586-001
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Component replacement procedures 75
To Next Page
Loading...
Need help?
General