Power connector (DC in) cable
Table 5-8 Power connector cable description and part number
Description Spare part number
Power connector cable L99191-001
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Remove the bottom cover (see Bottom cover on page 21).
3. Remove the battery (see Battery on page 23).
4. Remove the system board (see System board on page 30).
Remove the power connector cable:
▲ Disconnect the power connector cable from the system board.
Reverse this procedure to install the power connector cable.
Component replacement procedures 33