6–6 Maintenance and Service Guide
Removal and Replacement Procedures
6.4 Hard Drive
1. Prepare the notebook for disassembly (refer to Section 6.3).
2. Loosen the 2 Phillips PM2.5×6.0 screws 1 that secure the
hard drive cover to the notebook.
3. Lift the right side of the hard drive cover and swing it to
the left 2.
4. Remove the hard drive cover.
✎
The hard drive cover is included in the Miscellaneous Plastics
Kit, spare part number 393593-001.
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
5400-rpm
80-GB
60-GB
40-GB
393548-001
393546-001
393544-001
4200-rpm
80-GB
60-GB
40-GB
30-GB
393547-001
393545-001
393543-001
393542-001
To Next Page
Loading...
Need help?
General
