To Next Page

To Previous Page

6. Choose to restart now or later. The docking station might not work until the next restart. If you choose

to restart the computer, rst remove any disks from the computer’s drives. Click Finish.

7. Be sure that you have the latest drivers installed. Go to http://www.hp.com/support and select your

country or region. Select Software and Drivers, type the dock model number (located on the bottom of

the docking station), and then select Find my product. Click the link for your specic docking station,

and then download the latest drivers.

Conguring an external monitor

Using DisplayLink

Use DisplayLink to congure the display of a monitor attached to the docking station:

1. Click the DisplayLink icon in the taskbar.

2. To set the external monitor as an extension of the primary monitor, click Extend.

– or –

To set the external monitor as a copy of the primary monitor, click Mirror.

– or –

To set the external monitor to be the only display, click Notebook monitor o.

– or –

To set the external monitor to be the primary display, click Set as main monitor.

DisplayLink allows you to optimize the display for video, check for updates, and congure advanced settings.

DisplayLink options might vary, depending on the operating system. For instructions on conguring the

external monitor using Windows, see Using Windows on page 7.

Using Windows

Use Windows to congure the display of a monitor attached to the docking station.

NOTE: When you rst connect the docking station to a computer using Windows 7, the Windows properties

screen appears, and the external display is automatically congured in Mirror mode as the default.

1. If the computer is running Windows 10, type control panel in the taskbar search box, and then

select

Control Panel. Select Appearance and Personalization.

– or –

If the computer is running Windows 8, move the pointer down from the upper-right corner of the screen,

and then click Devices. Click Second screen.

– or –

If the computer is running Windows 7, right-click on the desktop, and then select Screen Resolution.

2. To set the external monitor as the primary monitor on computers running Windows 10 or Windows 8,

select Second screen only. To set the external monitor as the primary monitor on computers running

Windows 7, select Make this my main display.

– or –

Conguring an external monitor 7

HP elite usb-c User Manual

Questions and Answers: