4. Double-click the le that has an .exe extension (for example, lename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded le
from your hard drive.
Synchronizing a tablet and keyboard (select models only)
When you attach a tablet to the keyboard and restart the computer, the BIOS checks to see if the Embedded
Controller rmware on the keyboard needs to be synchronized. If so, BIOS will start the synchronization. If the
synchronization is interrupted, a notication screen displays for 10 seconds before the tablet restarts and
attempts to synchronize again.
NOTE: The Embedded Controller rmware will synchronize ONLY if the tablet or keyboard battery is more
than 50% charged, or if your tablet is connected to AC power.
60 Chapter 6 Using Setup Utility (BIOS) in Windows 8.1
To Next Page
Loading...
Need help?
General
