HP HP-97 User Manual

Assembly-Level
Maintenance
HP-97
3-6. RECOMMENDED TOOLS AND FIXTURES
HP PART/MODEL NUMBER DESCRIPTION
6040-0297 Silicone Lubricant
8700-0003 X-acto Knife
8700-0006 X-acto Knife Blade
8710-0026 Tweezers
8710-0549 Needle-Nose Pliers
8730-0008 Small Flat-Blade Screwdriver
8730-0020 Phillips Screwdriver
8500-0232 T.F. FREON
T-155321 Holding Nest
T-155239 HP-97 Card Reader Installation Tool
T-155435 HP-91/97 Field Service Connector Tool
00091-92137-97 Sequence PROM Assembly
ET 9613-91-M Fold Apart Tester
ET 9613-91-A Automatic Tester Option
ET 9610 Test System Mainframe
(See appendix C.) Program Memory Test Program Card
(See appendix C.) Functional Test Program Card
(See appendix C.) Data Card 1
(See appendix C.) Data Card 2
(See appendix C.) Diagnostic Test,Part One,Program Card
(See appendix C.) Diagnostic Test,Part Two,Program Card
3-7. INDIVIDUAL KEY SEQUENCE TESTS
3-8. Listed in table 3-1 are sequences of keystrokes that may be used to
check for properly functioning HP-97 operations. If the calculator' display
or printout does not agree with the entry in the appropriate column, the
operation is not functioning properly, and the logic PCA and/or keyboard
should be replaced. However, in some cases proper functioning with the
indicated keystrokes does not guarantee that the operation functions
properly with other acceptable key sequences. Therefore, if a calculator is
received for repair with a particular operational key sequence that does not
perform properly, this key sequence should be used to verify the complaint
rather than the key sequence in table 3-1. After performing the key sequence
test(s), return to step 13 in table 3-8.

HP HP-97 Specifications

General

Brand	HP
Model	HP-97
Category	Calculator
Language	English