HP HPE StoreOnce 3100 Series User Manual

Off = The drive is not configured by a RAID controller.Drive status LED3.
Solid green = The drive is a member of one or more logical drives.
Flashing green = The drive is rebuilding or performing a RAID
migration, stripe size migration, capacity expansion, or logical drive
extension.
Flashing amber/green = The drive is a member of one or more
logical drives and predicts the hard drive will fail.
Flashing amber = The drive is not configured and predicts the hard
drive will fail.
Solid amber = The drive has failed
Solid white = Do not remove the drive. Removing the drive causes
one or more of the logical drives to fail.
Do not remove LED4.
Off = Removing the drive will not cause a logical drive to fail.
Systems Insight Display LEDs
The HP Systems Insight Display LEDs represent the system board layout. The display enables
diagnosis with the access panel installed. Refer to the HPE ProLiant Maintenance and Service
Guide for more information.
Rear panel LEDs
Figure 10 Rear panel LEDs, HPE StoreOnce 3100 System
1 2 3 4 5
Figure 11 Rear panel LEDs, HPE StoreOnce 3500 Series and HPE StoreOnce 5100 System
1
2
3
4
1
5
6
4
4
1
iLO
PS2
PS1 PS1
1
2 3
4 5
Table 8 Rear panel LED behavior
StatusDescriptionItem
Off = DeactivatedUID LED1
Solid blue = Activated
Using LEDs to diagnose problems 25

HP HPE StoreOnce 3100 Series Specifications

General

Brand	HP
Model	HPE StoreOnce 3100 Series
Category	Storage
Language	English