Using Bluetooth
User’s Guide 9–18
Devices that can provide dial-up networking include Bluetooth:
■ Mobile phones
■ Desktop computers
■ Modems
Using Dial-Up Networking
To connect to a device that provides modem access:
1. From the Today screen, tap iPAQ Wireless > Bluetooth >
Manager.
2. Tap New > Connect to a Network > Next.
3. Follow the connection wizard instructions.
Note: After you create the dial-up networking shortcut with a
device, tap and hold the shortcut icon in the My Shortcuts tab of
the Bluetooth Manager, and tap Connect.
4. Tap New Connection.
5. Tap OK.
6. Enter a name in the Connection Name field.
7. Enter a phone number. You must sometimes enter the country
code and area code, depending on where you are calling.
8. Tap OK to begin dialing.
Note: Some mobile phones require a bond between devices
(see the section “Pairing Devices”).
To connect to the Internet and use Pocket Internet Explorer, you
must first connect to a Bluetooth phone from Bluetooth Manager.
To make this connection the default dial-up connection for Pocket
Internet Explorer:
IMPORTANT: All Bluetooth default connections are made
using the following procedure. Default connections cannot be
made through Bluetooth Settings on the iPAQ Wireless screen.
To Next Page
Loading...
Need help?
General
