Troubleshooting
User’s Guide 12–7
Expansion Cards
Use the following suggestions to troubleshoot problems with
expansion cards on your iPAQ Pocket PC. For more information
on expansion cards, refer to Chapter 11, “Expansion Cards.”
Problem Solution
I cannot get my
iPAQ Pocket PC
to recognize the
expansion card.
■ Be sure you have firmly pushed the expansion card
down into the iPAQ Pocket PC.
■ Be sure to install any third party drivers.
I cannot insert
my card.
■ Be sure the label is facing the front of the unit.
■ Be sure you are not inserting the card at an angle.
■ Be sure you insert the connection area first.
I cannot remove
my SD card.
Push the SD card in to release the locking mechanism. The
card will pop out slightly and then can be easily removed.
My iPAQ Pocket
PC cannot
recognize
my card.
■ Be sure you have loaded any drivers that came with the
expansion card you purchased.
■ Reset the device by using the stylus to lightly press the
Reset button.
To Next Page
Loading...
Need help?
General
