Managing the Battery
User’s Guide 3–11
To charge your Pocket PC using the HP Desktop Cradle:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
HP Desktop Cradle 2.
2. Slide the bottom of your Pocket PC into the HP iPAQ
Cradle 3 and push firmly to seat it.
Ä
CAUTION: To avoid damaging your Pocket PC or the cradle, check to
be sure the Pocket PC and cradle connectors are properly aligned
before pushing the Pocket PC into the HP Desktop Cradle.
Note: The amber charge light on the front of the Pocket PC blinks
while the battery is recharging and turns solid amber
(nonblinking) when the battery is fully charged.
To Next Page
Loading...
Need help?
General
