A-1
A
IDM Technical Reference
Device Support for IDM Functionality
Due to variations in hardware and software configuration of various ProCurve
Devices, not all IDM [Access Profile] features are supported on all devices.
The following table indicates IDM functionality supported by ProCurve
Device type at the time this manual was printed.
For the 2600 series, release H.08.53 (or newer) of the device software is
required for QoS support in IDM.
For the 2800 series, release I.08.55 (or newer) of the device software is
required for QoS support in IDM.
The 9300 series and 6100 series are not "edge" switches thus are not included
in the table.
ProCurve unmanaged switches do not support IDM, including: 2700 series,
2300 series, 2124, and 408.
Please check the ProCurve Web site (www.procurve.com) for the latest
information on supported features and devices.
IDM Functions:
Device Type:
VLAN QoS Bandwidth Network
Resources
5300xl series X X X X
4100gl series X
3400cl series X X X
2600 series, 2600PWR, 2800 series X X
2500 Series X
420 Wireless Access Point X
To Next Page
Need help?
General