10
HP Switch zl Modules
Note The management module must be updated in the E8212 zl switch prior to
installing in the E8206 zl switch. This is because the E8206 zl switch does not
recognize a management module running software prior to K.14.34.
Once a management module has been updated to the minimum supported
E8
206 zl software, all future software updates can be performed on either the
E8206 zl or E8212 zl switches.
Updating Software and BootROMs to work in an E8206 zl
Module
In order to update an E8212 zl management module to work in an E8206 zl
switch, you must first update the module’s software. Depending on the
existing E8212 zl software version, the update requires either a one or two-
step process. (See “Software upgrade process” on page 10.)
If the current software on the E8212 zl management module is K.12.31 through
K.13
.48, you must update the software twice. The first update is to version
K.13.60, and the second update is to K.14.34 or greater.
If the current software on the E8212 zl management module is K.13.51 or
new
er K.13 version, you need only to update the software once to version 14.34
or greater.
Figure 1. Software upgrade process
To Next Page
Loading...
Need help?
General
