memory. The monitor automatically stores the new setting, then recognized the new mode just as it does
a preset mode. In addition to the 15 factory present modes for the L1745 model, there are four user modes
that can be entered and stored.
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor uses less than 70 watts of power and the
Power light is green.
The monitor also supports a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the
power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize less
than 2 watts of power. There is a brief warm up period before the monitor will return to its normal operating
mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes called power
management features).
NOTE: The above power saver feature only works when connected to computers that have
energy saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter
into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the
monitor to enter the reduced power state, the power light blinks amber.
34 Appendix B Technical Specifications ENWW
To Next Page
Loading...
Need help?
General
