HP L2401x User Manual

Installing the VESA Adapter Plate onto the Monitor
NOTE: This apparatus is intended to be supported by a UL or CSA Listed wall-mount bracket.
1. Remove the stand from the monitor panel. Refer to Removing the Stand from the Monitor
on page 7.
2. Install the VESA adapter plate that shipped with the monitor.
a. With the monitor face down on the table, slide the VESA adapter plate from the lower edge
of the monitor toward the bracket hinge until the VESA adapter plate is in position over the
bracket hinge.
Figure 2-8 Positioning the VESA adapter plate
VESA Adapter Plate
9

HP L2401x Specifications

General

Brand	HP
Model	L2401x
Category	Monitor
Language	English