Turning on the Monitor
1. Press the power button on the front of the monitor to turn it on.
2. Press the power button on the computer to turn it on.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on the
screen for a prolonged period of time (12 or more consecutive hours of non-use). To avoid burn-in
image damage on the monitor screen, you should always activate a screen saver application or turn off
the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may
occur on all LCD screens. Monitors with a burned-in image are not covered under the HP warranty.
When the monitor is powered on, the power LED on the front of the monitor is blue.
Locating the Rating Label
The rating label on the monitor provides the spare part number, product number, and serial number.
You may need these numbers when contacting HP about the monitor model. The rating label is located
on the rear panel of the monitor.
Figure 2-14 Locating the rating labels
Turning on the Monitor
13
To Next Page
Loading...
Need help?
General
