To Next Page

To Previous Page

is a condition that might occur on all LCD screens. Burn-in damage on the monitor is not covered under the

HP warranty.

NOTE: If pressing the power button has no eect, the Power Button Lockout feature might be enabled. To

disable this feature, press and hold the monitor power button for 10 seconds.

NOTE: On select HP monitors, you can disable the power light in the OSD menu. Press the Menu button to

open the OSD, select Power, select Power LED, and then select O.

▲ Press the power button on the monitor to turn it on.

When you rst turn on your monitor, a monitor status message is displayed for 5 seconds. The message

shows which input is the current active signal, the status of the auto-switch source setting (On or O; default

setting is On), the current preset display resolution, and the recommended preset display resolution.

The monitor automatically scans the signal inputs for an active input and uses that input for the display.

HP watermark and image retention policy

Some monitors are designed with In-Plane Switching (IPS) display technology, which provides ultrawide

viewing angles and advanced image quality. Though suitable for many applications, this panel technology is

not suitable for static, stationary, or xed images for long periods of time, unless you use screen savers.

Applications with static images can include camera surveillance, video games, marketing logos, and

templates. Static images can cause image retention damage that could look like stains or watermarks on

the monitor's screen.

Image retention damage on monitors that are in use 24 hours per day is not covered under the HP warranty.

To avoid image retention damage, always turn o the monitor when it is not in use, or use the power

management setting, if supported on your computer, to turn o the monitor when the computer is idle.

14 Chapter 1 Getting started

Other manuals for HP M34D

Questions and Answers:

Need help?

Do you have a question about the HP M34D and is the answer not in the manual?

General