To Next Page

To Previous Page

Using Auto-Sleep Mode (select products only)

Your monitor has an energy-saving feature called Auto-Sleep Mode, a reduced power state. This section

describes how to activate or adjust Auto-Sleep Mode on your monitor.

When Auto-Sleep Mode is enabled (enabled by default), the monitor enters a reduced power state when the

computer signals low power mode (absence of either horizontal or vertical sync signal).

Upon entering this reduced power state (Auto-Sleep mode), the monitor screen is blanked, the backlight turns

o, and the power light turns amber. The monitor draws less than 0.5 W of power when in this reduced power

state. The monitor wakes from Auto-Sleep mode when the computer sends an active signal to the monitor

(for example, when you activate the mouse or keyboard).

To disable Auto-Sleep Mode in the OSD:

1. Press the Menu button to open the OSD, or press the center of the OSD controller to open the OSD.

2. In the OSD, select Power.

3. Select Auto-Sleep Mode, and then select O.

Using low blue light mode (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor

uses a low blue light panel in default setting mode.

In the default setting mode, this monitor's low blue light panel is certied by TÜV to reduce blue light output

and create a more relaxing and less stimulating image while you read content on the screen.

Adjusting blue light output (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor

allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating

image while you read content on the screen.

To adjust the blue light output from the monitor:

1. Press one of the OSD buttons to activate the buttons, and then press the Menu button to open the OSD.

Select Color.

If you are using a controller, press the center of the OSD controller to open the OSD.

2. Select Low Blue Light from the setting options.

● Low Blue Light: (TÜV certied) Reduces blue light for improved eye comfort.

● Reading: Optimizes blue light and brightness for indoor viewing.

● Night: Adjusts to the lowest blue light and reduces the impact on sleep.

3. Select Save and Return to save your setting and close the menu. Select Cancel if you do not want to save

the setting.

4. In the Main menu, select Exit.

Chapter 2 Using the monitor

Other manuals for HP M34D

Questions and Answers:

Need help?

Do you have a question about the HP M34D and is the answer not in the manual?

General