HP MultiSeat t100 - Thin Client User Manual

8. While holding the body of the assembly, pull the assembly away from the front of the chassis
while guiding the cables through the hole in the drive cage (3).
Figure 5-49 Guiding the wires through the drive cage
9. Remove the assembly from the chassis.
To reinstall the front I/O/power supply assembly, reverse the removal procedure.
70 Chapter 5 Removal and Replacement Procedures

HP MultiSeat t100 - Thin Client Specifications

General

Brand	HP
Model	MultiSeat t100 - Thin Client
Category	Server
Language	English