For information about inserting and removing the SIM, see Inserting and removing a SIM
on page 22.
For information about HP Mobile Broadband and how to activate service with a preferred mobile
network operator, see the HP Mobile Broadband information included with your computer. For
additional information, see the HP website at
http://www.hp.com/go/mobilebroadband (select regions/
countries only).
Inserting and removing a SIM
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1. Shut down the computer.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery (see
Inserting or removing the battery on page 46).
7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE: See the image on the battery bay to determine which way the SIM card should be
inserted into your computer.
8. Replace the battery.
NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.
9. Reconnect external power.
10. Reconnect external devices.
11. Turn on the computer.
22 Chapter 3 Connecting to a network
To Next Page
Loading...
Need help?
General