Quick Start Guide
31
Filename: sb3usqs.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: kimt
Revision #: 159 Page: 31 of 134 Printed: 01/14/03 09:36 AM
Basics
Note:
If you do not see this Volume icon, click Start,
Control Panel, Sounds, Speech, and
Audio Devices, if it is present, and then
double-click Sounds and Audio Devices to
open the Sounds and Audio Devices Properties
window. On Volume tab, place a check in the
Place volume icon in the taskbar check
box. Click Apply, and then click OK. The
Volume icon appears in the taskbar.
2 In the Volume Control window, select Options
and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a
check in the Microphone check box.
5 Click OK.
6 Click the Advanced button in the
Microphone column. If you do not see the
Advanced button, select Options from the
Recording Control window, and then click
Advanced Controls.
7 Place a check in the
Alternate Microphone
check box. (This box may be labeled Mic2
Select.)
8 Click Close.
9 Click X (Close) on the upper-right corner of
the Recording Control window.
Adjusting microphone volume
If you need to adjust the volume of the
microphone, whether it is connected to the
front of the PC or to the back, follow the
procedure below:
1 Double-click the Volume icon on the
taskbar. The Volume Control window
opens.
2 In the Volume Control window, select Options
and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a
check in the Microphone check box.