Removal and replacement procedures
Maintenance and Service Guide 4–5
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 67 screws, in 10 different sizes, that must be removed, replaced, or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Serial number
Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is
located on the bottom of the computer.
Item Component Description
1 Product name This is the product name affixed to the front of your
computer.
2 Serial number (s/n) This is an alphanumeric identifier that is unique to each
product.
3 Part number/Product number (p/n) This number provides specific information about the
product’s hardware components. The part number helps a
service technician to determine what components and
parts are needed.
4 Model description This is the alphanumeric identifier you use to locate
documents, drivers, and support for your computer.
5 Warranty period This number describes the duration (in years) of the
warranty period for this computer.
To Next Page
Loading...
Need help?
General