HP ProCurve 2510G Series User Manual

5-20
RADIUS Authentication, Authorization and Accounting
Commands Authorization
The results of using the HP-Command-String and HP-Command-Exception
attributes in various combinations are shown below.
You must configure the RADIUS server to provide support for the HP VSAs.
There are multiple RADIUS server applications; the two examples below show
how a dictionary file can be created to define the VSAs for that RADIUS server
application.
HP-Command-String HP-Command-Exception Description
Not present Not present If command authorization is enabled
and the RADIUS server does not
provide any authorization attributes in
an Access-Accept packet, the user is
denied access to the server. This
message appears: “Access denied: no
user’s authorization info supplied by
the RADIUS server.”
Not present DenyList-PermitOthers(1) Authenticated user is allowed to
execute all commands available on
the switch.
Not present PermitList-DenyOthers(0) Authenticated user can only execute
a minimal set of commands (those that
are available by default to any user).
Commands List DenyList-PermitOthers(1) Authenticated user may execute all
commands except those in the
Commands list.
Commands List PermitList-DenyOthers(0) Authenticated user can execute only
those commands provided in the
Commands List, plus the default
commands.
Commands List Not present Authenticated user can only execute
commands from the Commands List,
plus the default commands.
Empty Commands
List
Not present Authenticate user can only execute a
minimal set of commands (those that
are available by default to any user).
Empty Commands
List
DenyList-PermitOthers(1) Authenticated user is allowed to
execute all commands available on
the switch.
Empty Commands
List
PermitList-DenyOthers(0) Authenticate user can only execute a
minimal set of commands (those that
are available by default to any user).

HP ProCurve 2510G Series Specifications

General

Brand	HP
Model	ProCurve 2510G Series
Category	Network Router
Language	English