2-33
Installing the Switch
Sample Network Topologies for PWR Switches
Installing the Switch
As a Segment Switch Implementing PoE
Figure 2-24. Segment network configuration with PoE switches
As shown in the illustration above, the IP telephones have been inserted in
between the Switch 2610-48-PWR and the PCs, and wireless access points
(WAPs) have been connected to another Switch 2610-48-PWR. Both the
telephones and WAPs will receive PoE power from each of the switches. Only
devices directly connected to the PWR switches can receive PoE power.
Devices connected to a non-PWR segment switch cannot receive PoE power.
Server with
Gigabit
Ethernet NIC
Switch 2610-48 Non-PWR
Gigabit
fiber-optic cable
uplink
Switch 2610-48-PWR
600 RPS/EPS
PCs, printers,
and local
servers
Switch
2610-48-
PWR
Twisted-pair straight-
through or crossover cables
Wireless
Access Points
Category 5e twisted-pair straight-through or
crossover cable for 1000 Mbps connection to server
To Next Page
Loading...
Need help?
General