2-35
Installing the Switch
Sample Network Topologies for PWR Switches
Installing the Switch
Stacking the Switch
Switch 2610 and 2610-PWR Series devices can be connected together, through
standard network connections, and managed through a single IP address. Up
to 16 switches can be connected together in such a “virtual stack”.
You identify a Switch 2610 or 2610-PWR Series device as the “Commander”
and give that switch an IP address. Up to 15 other switches in the network can
then easily be configured as Members of the stack and managed through the
Commander’s IP address. The management includes Telnet access and web
browser interface access to the Commander and to each Member switch
through the Commander.
For more information on stacking your switch, see the Management and
Configuration Guide, which is on the ProCurve Web site at www.hp.com/go/
procurve/manuals, (See page 1-13).
To Next Page
Loading...
Need help?
General