HP ProCurve 3400cl-48G User Manual

1-11
Introducing the Switch
Switch Features
Introducing the Switch
Switch Features
The features of the Series 3400cl Switch devices include:
■ 24 or 48 auto-sensing 10/1001000Base-T RJ-45 ports with HP Auto-MDIX.
■ four dual-personality ports—either the auto sensing 10/100/1000Base-T
RJ-45 or the mini-GBIC can be used for each port.
■ one slot (optional cl module slot) is provided in the back of the device to
support a series of transceivers to provide box connectivity to other
switch boxes, to a 10 Gig concentrator or to any Ethernet compatible
uplink.
■ one auxiliary port is provided.
■ The Series 3400cl Switch devices can be connected to a ProCurve
RPS/EPS (J8168A) and receive full redundant power from that unit. If the
internal power supply in the switch fails, the RPS/EPS unit will immedi-
ately provide all the power necessary to keep the switch running.
■ plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational.
■ IEEE 802.3ab Auto MDI/MDI-X on all 10/100/1000-T twisted-pair ports,
meaning that all connections can be made using straight-through
twisted-pair cables. Cross-over cables are not required, although they
will also work. The pin operation of each port is automatically adjusted
for the attached device: if the switch detects that another switch or hub
is connected to the port, it configures the port as MDI; if the switch detects
that an end-node device is connected to the port, it configures the port as
MDI-X.
■ automatic learning of the network addresses in each switch’s 8000-
address forwarding table, (with configurable address aging value).
■ automatically negotiated full-duplex operation for the 10/100/1000-T RJ-
45 ports when connected to other auto-negotiating devices—the mini-
GBIC ports always operate at full duplex.
■ easy management of the switch through several available interfaces:
• console interface—a full featured, easy to use, VT-100 terminal
interface that is especially good for out-of-band switch management
or for Telnet access to the switch.
• web browser interface—an easy to use built-in graphical interface
that can be accessed from common web browsers.
• ProCurve Manager—an SNMP-based, graphical network manage-
ment tool that you can use to manage your entire network. This
product is included with your new switch.

HP ProCurve 3400cl-48G Specifications

General

Brand	HP
Model	ProCurve 3400cl-48G
Category	Switch
Language	English