HP ProCurve Series 6600 User Manual

2-7
Installing the Switch
Installation Procedures
Installing the Switch
Figure 2-3. Checking the LEDs on the 6600-24G and 6600-24G-4XG
Figure 2-4. Checking the LEDs on the 6600-24XG
LED Behavior:
During the self test:
• Initially, all the status, LED Mode and port LEDs are on for most of
the duration of the test.
• Most of the LEDs go off and then may come on again during phases
of the self test. For the duration of the self test, the Test LED stays on.
When the self test completes successfully:
•The Power and Fan Status LEDs remain on.
•The Fault and Test LEDs go off.
• The port LEDs on the front of the switch go into their normal
operational mode:
Switch port LEDs
Test LED
Power and
Fault LEDs
Switch port LEDs
Power and
Fault LEDs
Test LED

HP ProCurve Series 6600 Specifications

General

Brand	HP
Model	ProCurve Series 6600
Category	Switch
Language	English