HP ProCurve Series 6600 User Manual

2-11
Installing the Switch
Installation Procedures
Installing the Switch
Figure 2-5. Mounting in a two post rack using the balanced option.
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws. Remember to
use the correct accessory kit for your switch, see page 2-1.
Figure 2-6. Example attaching mounting brackets
8 mm
M4 screws

HP ProCurve Series 6600 Specifications

General

Brand	HP
Model	ProCurve Series 6600
Category	Switch
Language	English