2-1
Operating Rules
2
Operating Rules
This chapter discusses the operating rules and characteristics of the ProCurve
product capabilities. The following products are discussed:
■ The ProCurve Switch 3500yl-24G-PWR (J8692A), is used as a PSE device
to provide PoE power to PDs thru the 24 RJ45 ports.
■ The ProCurve Switch 3500yl-48G-PWR (J8693A), is used as a PSE device
to provide PoE power to PDs thru the 48 RJ45 ports.
■ The ProCurve Switches 5406zl (J8697A) and 5412zl (J8698A), are used as
PSE devices to provide PoE power to the PDs thru the 24 port Gig-T PoE
module (J8702A), or the 20 port Gig-T plus 4 mini-GBIC PoE module
(J8705A).
Switch PoE Operation
The Switch 3500yl-24G-PWR can supply up to 398 Watts of PoE power across
the 24 ports. The Switch 3500yl-48G-PWR can supply up to 398 Watts of PoE
power across the 48 ports.
The Switch 5406zl can supply up to 1800 watts of PoE power and the Switch
5412zl can supply up to 3600 watts of PoE power. It depends on which power
supply is installed. The J8712A power supply provides up to 273 watts of PoE
power. If two J8712As are installed they can supply up to 546 watts of PoE
power and if four are installed they can supply up to 1092 watts of PoE power.
The J8713A power supply provides up to 900 watts of PoE power. If two
J8713As are installed they can supply up to 1800 watts of PoE power and if
four are installed they can supply up to 3600 watts of PoE power. The two
types of power supplies can be mixed (although not recommended), that is,
one or two J8712As and one or two J8713As can be installed at the same time
depending on which of the Series 5400zl Switches are being used.
Note ProCurve Networking highly recommends that the two types of power
supplies are not mixed in the same 5400zl chassis or Power Supply Shelf. See
page 4-9 for more information.
To Next Page
Loading...
Need help?
General
