Electrostatic Discharge
B-2 HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-appb Electrostatic Discharge
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 9:45 AM
Grounding Methods
There are several methods for grounding. Use one or more of the following methods
when handling or installing electrostatic-sensitive parts:
• Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm
± 10 percent resistance in the ground cords. To provide proper ground, wear the
strap snug against the skin.
• Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor mats.
• Use conductive field service tools.
• Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have a HP
authorized reseller install the part.
NOTE: For more information on static electricity, or assistance with product installation,
contact your HP authorized reseller.
To Next Page
Loading...
Need help?
General
