Power Cord Requirements
C-2 HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: h-appc Power Cord Requirements
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 9:47 AM
Country-Specific Requirements
Use Table C-1 to identify the appropriate accredited agency in your country.
Table C-1: Power Cord Set Requirements By Country
Country Accredited Agency Applicable Note Numbers
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland SETI 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
2
conductor size. Power
cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency
responsible for evaluation in the country where it will be used.
2. Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall plug must be a
two-pole grounding type with a NEMA 5-15P (15 A, 125 V).
3. Appliance coupler, flexible cord, and wall plug must bear a T mark and registration number in
accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or VCTF,
3-conductor, 1.0 mm
2
conductor size. Wall plug must be a two-pole grounding type with a
Japanese Industrial Standard C8303 (7A, 125V) configuration.
To Next Page
Loading...
Need help?
General
