●
The thin client may be placed under a monitor stand with at least 2.54 cm (1 in) clearance:
Non-supported placement
HP does not support the following placements for the thin client:
CAUTION: Non-supported placement of thin clients could result in operation failure and/or damage to the
devices.
Thin clients require proper ventilation to maintain operating temperature. Do not block the vents.
Do not install the thin client with the I/O ports oriented towards the ground.
Do not put thin clients in drawers or other sealed enclosures. Do not place a monitor or other object on top of
the thin client. Do not mount a thin client between the wall and a monitor. Thin clients require proper
ventilation to maintain operating temperatures.
●
In a desk drawer:
14 Chapter 2 Setup
To Next Page
Loading...
Need help?
General
