HP Thin Client T740 User Manual

Replacing the access panel
To replace the access panel:
1. Position the access panel on the chassis, approximately 6 mm (.24 in) inside the edge of the chassis.
Slide the panel toward the front of the chassis (1) until it locks into place.
2. Move the access panel latch (2) to the left to secure the access panel.
3. Insert the hooks on the right side of the rear I/O panel (1) into the right side of the back of the chassis,
rotate the left side (2) to the chassis, and then press it to the chassis until it locks in place.
18 Chapter 3 Hardware changes

HP Thin Client T740 Specifications

General

Brand	HP
Model	Thin Client T740
Category	Desktop
Language	English