HP TippingPoint Series User Manual

22 TippingPoint 10 Overview
USB Update and Restore
The TippingPoint 10 supports TOS updates and snapshot restorations from update and snapshot files stored
on a USB thumb drive. The device must be unconfigured or reset to pre-OBE factory settings.
1. Ensure that the desired TOS update or snapshot file with a
.PKG extension is available in the top level
directory of the USB drive.
2. With the device powered off, insert the USB drive.
3. Power on the device.
4. The device boots up and searches for the update or snapshot file and begins installation of the file.
5. Allow the device to complete installation and reboot.
If an update package and a snapshot file are both present on the device, the update package is installed
first. The device reboots, and then the snapshot file is installed, and the device reboots a second time.

HP TippingPoint Series Specifications

General

Brand	HP
Model	TippingPoint Series
Category	Security System
Language	English