HP W1907 User Manual

Setting Up the Monitor
3–14 User’s Guide
Pivoting the Monitor (Select Models Only)
✎
NOTE: For full functionality of this pivot feature, the My Display software may need to be installed. See “My Display
Software” in the Operating the Monitor chapter for information on how to install this software. Some graphics cards
support rotating the image of the display automatically.
1. Facing the monitor and holding its base down, tilt the monitor backward 10 to 30 degrees by pulling the bottom
of the screen toward you.
Ä
CAUTION: The first step is important—the double-hinged monitor can scratch the base surface if the monitor is not
tilted back enough before pivoting it.
2. If the monitor is in its landscape position, after it is tilted back, pivot it clockwise to portrait position. If it is in
portrait position, tilt it back and pivot the monitor counterclockwise to landscape orientation.

HP W1907 Specifications

General

Pixel pitch	0.285 x 0.285 mm
Display diagonal	19 \
Display resolution	1440 x 900 pixels
Viewable size diagonal	483 mm
Contrast ratio (typical)	1000:1
Digital vertical frequency	55 - 75 Hz
Digital horizontal frequency	30 - 83 kHz
Power requirements	100-240VAC
HDCP	Yes
Certification	FCC Class B
Product color	Silver
Country of origin	China
Market positioning	-
Panel mounting interface	100 x 100 mm
Power consumption (standby)	2 W
Power consumption (typical)	49 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 90 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (without stand)	182 mm
Width (without stand)	452 mm
Height (without stand)	378 mm
Weight (without stand)	5000 g