To Next Page

To Previous Page

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Before connecting the cables, route the cables through the cable routing hole in the center of the

stand.

3. Depending on your model and configuration, connect either the DisplayPort, DVI, HDMI, or VGA

video cable between the PC and the monitor.

NOTE: The monitor is capable of supporting either analog or digital input. The video mode is

determined by the video cable used. The monitor will automatically determine which inputs have

valid video signals. The inputs can be selected by pressing the Input button on the front panel or

through the On-Screen Display (OSD) feature by pressing the Menu button.

●

For analog operation, connect the VGA signal cable to the VGA connector on the rear of

the monitor and the other end to the VGA connector on the computer (cable provided with

select models).

6 Chapter 2 Setting Up and Using the Monitor

HP Z24i User Manual

Other manuals for HP Z24i