To Next Page

To Previous Page

components and lead to malfunctions.

• The fusion point of Lead-Free solder is requested. Repairing with conventional lead wire may cause

damage.

• Work quickly to avoid overheating the circuit board as soon as you confirm the steady soldering condition.

• Keep the soldering iron tip clean and well tinned and when replacing parts.

• A close inspection of the circuit board revealed look in good condition.

• After repaired, must connect source to each port to check Main board function is ordinary.

Note: (The requirement of professional repairers’ regulation by ERP lot5)

1) The professional repairer has the technical competence to repair electronic displays and complies with the

applicable regulations for repairers of electrical equipment in the Member States where it operates. Reference

to an official registration system as professional repairer, where such system exists in the Member States

concerned, shall be accepted as proof of compliance with this point.

2) The professional repairer is covered by insurance covering liabilities resulting from its activity, regardless of

whether this is required by the Member State.

Audio connector M1

Repair the audio connector:

1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You

can gently push down with the soldering iron once everything is molten to move the M1 out of the

through holes.

2) Lift the M1 connector from the PCB.

3) Place the new component on the PCB. Be sure that it matches the PCB footprint.

4) Solder the new component.

HDMI connector J2

Repair the HDMI connector:

Other manuals for HP Z38c

Questions and Answers:

Need help?

Do you have a question about the HP Z38c and is the answer not in the manual?

General

3D	No
HD type	UltraWide Quad HD+
Pixel pitch	0.22908 x 0.22908 mm
Display diagonal	37.5 \
Display resolution	3840 x 1600 pixels
Display technology	LED
Native aspect ratio	21:9
Viewable size, vertical	366.5 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Viewable size, horizontal	879.6 mm
Digital vertical frequency	24 - 76 Hz
Digital horizontal frequency	27 - 130 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1600 x 900, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 1920 x 1600, 2560 x 1080, 2560 x 1600 (WQXGA)
On/off switch	Yes
USB hub version	3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-C
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	3
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	195 W
Annual energy consumption	93 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	80 W
Product color	Black
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 20 °
Number of OSD languages	10
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR

Weight and Dimensions