Technical Manual
Airbridge BTS3606A CDMA Base Station
System Description
Chapter 8 Technical Standards
8-1
Chapter 8 Technical Standards
8.1 General Technical Specifications
The BTS3606A is compliance with the following general technical specifications:
l TIA/EIA-97-D: Recommended Minimum Performance Standards for Base
Stations Supporting Dual-mode Spread Spectrum Mobile Stations.
l Federal IMT-MC (CDMA 2000) Cellular Mobile System Operating in Band 450
MHZ.
l C.S0032-0V1.0 Recommended Minimum Performance Standards for CDMA2000
High Rate Packet Data Access Network
l C.S0039-0V1.0 Enhanced Subscriber Privacy for CDMA2000 High Rate Packet
Data
l C.S0038-0V1.0 Signaling Conformance Specification for High Rate Packet Data
Air Interface
8.2 Um Interface
The BTS3606A is compliance with the following Um interface specifications:
I. Physical layer
TIA/EIA IS-2000-2-A: Physical Layer Standard for CDMA 1X Standards for Spread
Spectrum Systems.
C.S0024-0V4.0 CDMA2000 High Rate Packet Data Air Interface Specifications
II. MAC layer
TIA/EIA IS-2000-3-A: Medium Access Control (MAC) Standard for CDMA 1X
Standards for Spread Spectrum Systems.
III. Service capability
TSB2000: Capabilities Requirements Mapping for CDMA 1X Standards.
8.3 Abis Interface
The BTS3606A is compliance with the following Abis interface specifications:
I. Physical layer
l E1 interface:
E1 Physical Interface Specification, September 1996
l SDH STM-1
To Next Page
Loading...
Need help?
General
