To Next Page

To Previous Page

Then check the status of the Internet indicator. When the Internet indicator

turns green, you can access the Internet.

The preceding operations need only be performed on a computer once. The

next time when you power on the computer, you can access the Internet without

any other configurations.

3 Setting Up a Wireless Connection

If a wireless network adapter is installed on your computer, you can connect

your computer to the HG532t over a wireless connection.

The HG532t's wireless network function is enabled by default. To check the

function status, see section 5.2 "Enabling or Disabling the Wireless Network

Function".

There are two methods for setting up a wireless connection between the

HG532t and your computer.

3.1 Setting Up a Wireless Connection With the WPS

Button

The HG532t supports the Wi-Fi Protected Setup (WPS) function (default is

enabled) in Push Button Configuration (PBC) mode. If your computer also

supports the WPS function, do the following to connect your computer to the

HG532t wirelessly:

Step 1 Press and hold the WPS button on the HG532t's side panel for at least

1 second.

The WPS indicator on the HG532t starts blinking, indicating that the

WPS negotiation is in progress.

The method for installing the wireless adapter and its driver varies by

vendor. For details, see the installation guide provided by the vendor

of your wireless adapter.

Windows 7 supports the WPS function. Windows XP supports the

WPS function using the wireless network adapter.

Huawei HG532t User Manual

Other manuals for Huawei HG532t