Setting the Network-Access Parameters
HUAWEI HG655b Home Gateway
User Guide
5-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ice list drop-down combo box.
ode drop-down combo box.
8.
9. r name and password that are provided by the network operator in the
es, and keep the default settings of other
5. Select VOICE_TR069_INTERNET from the Serv
6. Select Route from the Connection m
7. Select PPPoE option button for Connection type.
Select Enable check box for NAT.
Enter the use
User name and Password text box
parameters.
10. Click Submit to save the settings.
After you complete the preceding settings, you can surf the Internet.
5.2 Accessing the Network by the PPP Dial-Up
Softw
addition, you need to perform dial-up operations
the HG655b and your computer for
Step 1
ction "5.1 Accessing the Network by the Embedded PPP Dial-Up Software
ction mode drop-down
Step 2
p software is pre-installed on certain computer operating systems. To
as
display the New Connection
4. nually, and then click Next.
d, and then click Next.
Name, and then click
7. then click Next.
e
sh.
connection. After the network connection is created, to access the network, double-click
the icon for the dial-up connection, and then click Connect in the displayed dialog box.
are on Your Computer
If you select this method for accessing the network, you need to install and configure the
dial-up software on your computer. In
on your computer upon each startup. To configure
the network access, do as follows:
Set the working mode of the HG655b to
Bridge
.
For details, refer to the procedure for enabling the embedded dial-up function described
in Step 3 in se
on the HG655b." Note that Bridge is selected from the Conne
combo box.
Configure the PPP dial-up software on your computer.
The PPP dial-u
create a dial-up connection, do as follows (taking the Windows XP operating system
an example):
1. Choose Start > All Programs > Accessories > Communications > Network
Connections.
2. Click Create a new connection in Network Tasks to
Wizard window, and then click Next.
3. Select Connect to the Internet, and then click Next.
Select Set up my connection ma
5. Select Connect using a broadband connection that requires a user name and
passwor
6. Enter the name (as desired) of the dial-up connection in ISP
Next.
Select Anyone's use or My use only, and
8. Enter the user name and password provided by the network operator and used for th
dial-up connection, and then click Next.
i
9. Select Add a shortcut to this connection to my desktop, and then click Fin
An icon for the dial-up connection is displayed on the desktop of your computer.
You need to perform the preceding operations only once for creating a network
To Next Page
Need help?
General
