Parameter Description
Remote Resource Host Access Status Data read/write status of a remote resource.
Isolation Threshold (ms) Write I/O latency difference between the
host and HyperMetro storage arrays.
Data Synchronization Direction Data synchronization direction. Possible
values are Local to Remote and Remote to
Local.
----End
5.1.1.2 Checking HyperMetro vStore Pair Information
This operation enables you to view information about existing HyperMetro vStore pairs,
logical ports and file systems.
Prerequisites
A HyperMetro vStore pair has been created.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > HyperMetro > HyperMetro vStore Pair.
Step 3 View the basic information about a HyperMetro vStore pair. Table 5-3 describes related
parameters.
Table 5-3 HyperMetro vStore pair parameters
Parameter
Description
Local vStore Name Name of the local vStore.
Remote vStore Name Name of the remote vStore.
vStore Pair Check results of local vStore. The value can be Normal,
Abnormal and Unknown.
Logical Port Check results of local vStore. The value can be Normal,
Abnormal and Unknown.
File System Check results of local vStore. The value can be Normal,
Abnormal, Warning and Unknown.
Step 4 Select one item from the table to view its details. Table 5-4 describes related parameters.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
138
To Next Page
Loading...
Need help?
General