Parameter Description Example Value
Standby IP Address Standby IP address of a
quorum server.
[Example]
None
Standby Port Standby port ID of a
quorum server.
NOTE
The port ID ranges from 1 to
65535.
[Example]
None
Step 5 Click OK.
----End
5.1.4.3 Adding a Link
Through this operation, you can add a link for a quorum server.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Data Protection > HyperMetro > Quorum Server.
Step 3 Select a quorum server for which you want to add a link and click Add in the Link area.
The Add Link dialog box is displayed.
Step 4 Select Controller and Port of storage devices to be connected and click Add.
NOTE
To ensure the reliability between quorum servers and storage systems, you are advised to add at least one link
between each controller of storage systems and a quorum server.
Step 5 Click OK.
----End
5.1.4.4 Removing a Link
Through this operation, you can remove a link configured for a quorum server.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Data Protection > HyperMetro > Quorum Server.
Step 3 Select a quorum server from which you want to remove a link and click Remove in the Link
area.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
156
To Next Page
Loading...
Need help?
General