Unboxing your Phone
9
Unboxing your Phone
Getting to know your phone
Do not cover the light sensor, as this will affect some of the phone's functions. Ensure that
you use a screen protector that has a purpose-built hole for the light sensor.
Inserting a SIM card and microSD card
Your phone's 2-in-1 card slot is located on the upper-left side of the phone. You can insert 2
nano-SIM cards, or 1 nano-SIM card and 1 microSD card.
Tips:
•
Your phone only supports nano-SIM cards. Contact your carrier for a new or replacement nano-
SIM card.
•
Only use standard nano-SIM cards to avoid damaging the SIM card tray.
•
Ensure that the card is in the correct position and keep the card tray level when inserting it into
your phone.
•
Be careful not to hurt yourself or damage your phone when using the SIM eject pin.
•
Store the SIM eject pin out of the reach of children to prevent accidental swallowing or injury.
1
Press and hold the power button and then select to turn off your phone.
Power button
Volume button
Fingerprint
scanner
Earpiece
Front camera
Dual-tone flash
Dual-lens
camera
Laser sensor
Status indicator
Light sensor
Noise reduction
microphone
USB-C port
Microphone
Speaker
Headset connector
Infrared
sensor