EasyManuals Logo
Home>Huawei>Switch>Quidway S5000 Series

Huawei Quidway S5000 Series Operation Manual

Huawei Quidway S5000 Series
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Operation Manual - QoS/ACL
Quidway S5000 Series Ethernet Switches Chapter 3 Logon User ACL Control Configuration
3-4
3.3.1 Define an ACL
You can only call the numbered basic ACL, ranging from 2000 and 2999, to implement
ACL control function. Use the same configuration commands introduced in the last
section.
3.3.2 Call ACL to Control SNMP User
To control the NM users with ACL, call the defined ACL when configuring SNMP
community name, username, and group name.
You can use the following commands to call an ACL.
Perform the following configuration in system view.
Table 3-3 Define a numbered basic ACL
Operation Command
Call an ACL when configuring
SNMP community name.
snmp-agent community { read | write } community-name [ [ mib-view
view-name ] | [ acl acl-number ] ]*
Call an ACL when configuring
SNMP group name.
snmp-agent group { v1 | v2c } group-name [ read-view read-view ]
[ write-view write-view ] [ notify-view notify-view ] [ acl acl-list ]
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-list ]
Call an ACL when configuring
SNMP username.
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-list ]
snmp-agent usm-user v3 user-name group-name [ authentication-mode
{ md5 | sha } auth-password ] [ privacy-mode des56 priv-password ] [ acl
acl-list ]
SNMP community name attribute is a feature of SNMP V1. Therefore calling an ACL for
SNMP community name configuration can filter the access to SNMP V1network
management system.
SNMP group name and username attribute is a feature of SNMP V2C and above.
Therefore calling an ACL for SNMP community name configuration can filter the access
to the network management system of SNMP V2C or higher. If you configure ACL
control in both of the commands, the switch will filter the NM users concerning both the
features.
Note:
You can call different ACLs for the above mentioned commands.
For more about the commands, refer to the Command Manual.

Other manuals for Huawei Quidway S5000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S5000 Series and is the answer not in the manual?

Huawei Quidway S5000 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S5000 Series
CategorySwitch
LanguageEnglish

Related product manuals