Network and sharing
55
Receiving a file using Wi-Fi Direct
When a file transfer request is made using Wi-Fi Direct, the
File transfer
dialog box will
be displayed. Touch
Accept
to receive the file. Open the notification panel and touch
Notifications
to check the file transfer progress.
By default, received files are saved to the
Wi-Fi Direct
folder in
Files
.
Transferring data between your phone and
computer
Connecting in picture transfer mode
The Picture Transfer Protocol (PTP) is an image transfer protocol that can be used to
transfer images between your phone and computer, making sharing easier.
1
Use a USB cable to connect your phone to the computer.
2
Swipe down from the status bar to open the notification panel. Set
USB connected
to
Photos
. Any drivers required will be installed automatically on the computer.
Once the drivers are installed, double-click the new drive icon that appears on your
computer to view the images stored on your phone.
Connecting in media transfer mode
The Media Transfer Protocol (MTP) is a communication protocol that can be used to
transfer files between your phone and computer. Before using MTP, make sure you have
Windows Media Player 11 or later installed on your computer.
1
Use a USB cable to connect your phone to the computer.
2
Swipe down from the status bar to open the notification panel. Set
USB connected
to
Files
. Any drivers required will be installed automatically on the computer.
Once the drivers are installed, double-click the new drive icon that appears on your
computer to view the files stored on your phone. You can browse multimedia content on
your phone easily using Windows Media Player.
Connecting in USB flash drive mode
If you have a microSD card in your phone, you can use your phone as a USB flash drive
and transfer files between the microSD card and a computer.
To Next Page
Loading...
Need help?
General
