Huawei SUN2000-36KTL User Manual

SUN2000-(33KTL-A, 36KTL, 42KTL)
User Manual
3 Inverter Storage
Issue 07 (2018-05-04)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
3 Inverter Storage
The following requirements should be met if the SUN2000 is not put into use directly:

Put the SUN2000 in the original package. Keep the desiccant and seal it using the
adhesive tape.

Keep the storage temperature at –40°C to +70°C and the humidity at 5%–95% RH.

The inverter should be stored in a clean and dry place and be protected from dust and
water vapor corrosion.

A maximum of five SUN2000s with the packing dimensions (W x H x D) of 1095 mm x
395 mm x 745 mm can be stacked. A maximum of six SUN2000s with the packing
dimensions (W x H x D) of 1045 mm x 400 mm x 680 mm can be stacked. To avoid
personal injury or device damage, stack SUN2000s with caution to prevent them from
falling over.

Periodic inspections are required during the storage. If any rodent bites are found,
replace the packing materials immediately.

If the inverter has been long-term stored, inspections and tests should be conducted by
qualified personnel before it is put into use.

Huawei SUN2000-36KTL Specifications

General

Purpose	Solar panel
Efficiency	98.8 %
Output power	36000 W
Weatherproof	Yes
Certification	EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
Input voltage	250 - 1100 V
Output voltage	220/380, 230/400, 277/480 V
Input frequency	- Hz
Power supply type	Outdoor
Power current type	DC-to-AC
Adjustable output voltage	-
Power protection features	Over current
International Protection (IP) code	IP65
Product color	White
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-25 - 60 °C
Operating relative humidity (H-H)	0 - 100 %

Weight and Dimensions

Depth	283 mm
Width	930 mm
Height	550 mm
Weight	62000 g