Huawei SUN2000-36KTL User Manual

SUN2000-(33KTL-A, 36KTL, 42KTL)
User Manual
5 Connecting Cables
Issue 07 (2018-05-04)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
Figure 5-2 Installing a support bar
----End
5.2 Connecting the Ground Cable (PE)
Prerequisites
The ground cable and OT terminal are available.

Ground cable: You are advised to use an outdoor copper cable with a conductor
cross-sectional area greater than or equal to 16 mm
2
, and the conductor cross-sectional
area should be greater than or equal to half of the conductor cross-sectional area of the
AC output power cable.

OT terminal: M6
Context

The ground point on the enclosure is preferred to connect to the PE cable for the
SUN2000.

The ground point in the maintenance compartment is used for connecting to the ground
cable included in the multi-core AC power cable. For details, see 5.3 Connecting AC
Output Power Cables.

There are two ground points on the enclosure and one of them is standby.

It is recommended that the ground cable be connected to a nearby ground point. For a
system with multiple SUN2000s connected in parallel, connect the ground points of all
SUN2000s to ensure equipotential connections to ground cables.
Procedure
Step 1 Strip an appropriate length of the insulation layer using a wire stripper, as shown in Figure
5-3.

Huawei SUN2000-36KTL Specifications

General

Purpose	Solar panel
Efficiency	98.8 %
Output power	36000 W
Weatherproof	Yes
Certification	EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
Input voltage	250 - 1100 V
Output voltage	220/380, 230/400, 277/480 V
Input frequency	- Hz
Power supply type	Outdoor
Power current type	DC-to-AC
Adjustable output voltage	-
Power protection features	Over current
International Protection (IP) code	IP65
Product color	White
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-25 - 60 °C
Operating relative humidity (H-H)	0 - 100 %

Weight and Dimensions

Depth	283 mm
Width	930 mm
Height	550 mm
Weight	62000 g