4
Procedure to operate the Rapid
Manual Advance Feature for a quick
system check
1. Press the button for 2 seconds.
2. Station run time will ash in the
display. This feature automatically
defaults to program A. You can select
program B or C by immediately
pressing the
button before the
number stops ashing.
3. After a 2 second pause, the program
will begin. Press the button
repeatedly to scroll through the stations
in the program.
Rain Sensor Bypass…
Simplied override of rain sensor
With the built-in rain sensor bypass, there
is no need for an additional manual bypass
switch when using rain sensors. The SRC
Plus works with most rain and freeze
sensors on the market today. If the sensor
is preventing system operation, just turn
the dial to “Run (Bypass Sensor)” and the
rain sensor will be overridden.
RUN
NEXT
PROGRAM
ST
ART
TIMES
STATION RUN TIME
YEAR
MONTH
DAY
RUNNING
AM
PM
24 HR.
SUN MON
TUES WED
THUR
FRI SAT EVEN
/
ODD
SYSTEM OFF
RUN (BYPASS SENSOR)
SET DAYS TO WATER
MANUAL - SINGLE STATIO
N
MANUAL - ALL STATIONS
SET CURRENT DATE / TIME
SET WATERING START TIMES
SET STATION RUN TIMES
Plus
Plus
PROGRAM
START
TIMES
Semi-Automatic Operation…
Manual watering of all stations
Turn the dial to “Manual-All Stations”
and choose either a program or a specic
station within that program to start
irrigating. Then turn the dial back to run,
and the SRC runs through the remaining
stations. You may also change the times on
a given program to create a custom manual
program. After the controller completes
the manual watering, it will return to the
original schedule.
PRODUCT FEATURES
AND BENEFITS (continued)