Hunter SRC Plus Product Information Guide

4
5
Easy Access Wiring Compartment…
Simplied wire hookups
The SRC Plus permits fast and easy
connection of wiring in the spacious wiring
compartment. With the sturdy terminal strip
there is no need to hook the wire around the
screw on the terminal to make a connection.
Instead, simply insert a straight wire end
next to the gripping screw and tighten for a
positive connection.
Simplied Single Zone
Manual Operation…
One station manual operation
The customer may want to manually
run a single station, without watering all
zones. The SRC allows this to happen
by a simple turn of the dial to “Manual-
Single Station,” and selecting the zone.
The selected zone will run for either the
time set in original scheduling or for the
specic time set for manual operation after
the dial is turned back to the run position.
After the controller completes the manual
watering, it will return to the original
schedule, even if modied for the
manual operation.
Time Saving Mounting Bracket…
Quicker, neater, easier installation
No need for special mounting templates
and directions. With the SRC, just hang
the wall bracket and slide the controller
onto the bracket. With the special wall
bracket there is extra stabilization on the
wall and no need to disassemble the unit to
access mounting holes in the cabinet.
Electrical Surge Protection…
Protects controller from electrical surges
A built-in MOV (Metal-Oxide Varistor)
protects the microcircuitry against
electrical surges caused by storms, power
uctuations, brownouts, etc.
Master Valve and Pump Start
Relay Circuit…
Compatible with Hunter PSR (Pump Start
Relay) and other popular relays
A master valve or Hunter PSR pump
start relay can be activated with 24 VAC
power by connecting the wires to the
C (Common) and MV (Master Valve)
terminals on the terminal strip.
SRC Plus Controller

Hunter SRC Plus Specifications

General

Brand	Hunter
Model	SRC Plus
Category	Controller
Language	English